| Customization: | Available |
|---|---|
| Installation Type: | Wall-Mounted Type |
| Sensing Type: | Resistive |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Our self-developed soil comprehensive sensor sensor has the characteristics of small size, integrated integration, convenient transportation, carrying, installation, and dynamic adjustment at any time. The appearance, working conditions, safety requirements, functional requirements and communication requirements of the equipment can all be used in different measurement environments.
The sensor is suitable for measuring soil temperature, moisture, total soil salt content (conductivity), soil pH, nitrogen, phosphorus, potassium and other parameters, which greatly facilitates customers' systematic assessment of soil conditions. .
The product network transmission adopts a stable and reliable operator network with mature technology, stable transmission, strong signal and wide coverage. At the same time, the device supports timing data collection and active upload to the server platform.
It is widely used in scientific experiments, water-saving irrigation, greenhouses, flowers and vegetables, grassland pastures, rapid soil testing, plant cultivation, sewage treatment, food storage, and measurement of water content and temperature of various particles.
l Transmission distance: up to 1 Km in towns, up to 3Km in suburbs
l Working frequency: ISM frequency band including 470-510 MHZ, etc.
l Standard: IEEE 802.15.4g
l Modulation method: based on spread spectrum technology, proprietary patented technology of semtech company
l Capacity: A gateway can connect to thousands of LoRa nodes
l Security: AES128 encryption
l Transmission rate: hundreds to tens of Kbps, the lower the rate, the longer the transmission distance
l Low cost, wide coverage, low power consumption, long life
l Consistent, stable and reliable
l Long transmission distance, strong signal
l Deployment service flexibility
l Battery life and long service life
l A physical layer modulation technology that can be used in different protocols
l Good security and confidentiality
|
Temperature measurement range |
-40ºC-80ºC |
|
Temperature accuracy |
±0.5ºC |
|
Temperature resolution |
0.1ºC |
|
Moisture measurement range |
0-100% |
|
Moisture accuracy |
±3% in the range of 0-53%; ±5% in the range of 53-100% |
|
Moisture resolution |
0.10% |
|
Conductivity measurement range |
0-10000us/cm |
|
Conductivity resolution |
10us/cm |
|
pH measurement range |
3-9pH |
|
pH measurement accuracy |
±0.3pH |
|
pH resolution |
0.01pH |
|
NPK measurement range |
0-1999mg/kg |
|
NPK measurement accuracy |
±2%F.s |
|
NPK resolution |
1mg/kg(mg/l) |
|
Storage environment |
-20ºC-60ºC |
|
Working pressure range |
0.9-1.1atm |
|
Response time |
<1s |
|
Protection level |
IP68 |
|
Installation method |
Embed all or insert all probes into the measured medium |
Note: The above parameters can be combined arbitrarily, please check the official website for details.
|
parameter name |
Parameter content |
|
Power supply |
Built-in lithium battery or 12V DC |
|
Working frequency |
470-510MHz frequency band |
|
Transmission distance |
1000 meters (default)/3km (theoretical limit) |
|
Signal protocol |
LoRa privacy agreement |
|
Operating temperature |
-20~50ºC |
|
Working humidity |
0~95% (relative humidity), non-condensing |
|
Dimensions |
110×85×44mm³ |
Please check the equipment list before installing the equipment:
|
name |
quantity |
|
High-precision sensor |
1 set |
|
Soil sensor |
1 set |
|
LoRa Cross Bridge Cloud Box |
1 (optional) |
|
12V power adapter |
1 (optional) |
|
Warranty card/certificate |
1 serving |
Select a suitable measurement location, avoid rocks, ensure that the steel needle does not touch hard objects, throw away the surface soil according to the required measurement depth, maintain the original tightness of the soil below, hold the sensor vertically and insert it into the soil. Do not shake left and right. It is recommended to measure multiple times for average value within a small range of a measuring point.
Dig a pit with a diameter of >20cm vertically, insert the sensor needle horizontally into the pit wall at a predetermined depth, and fill the pit tightly. After a period of stability, measurement and recording can be carried out for several days, months or even longer.
(1) If you have also purchased our LoRa Cross Bridge Cloud Box, first use the 12V power adapter delivered by our company to power the Cross Bridge Cloud Box.
(2) If the sensor is a power-powered version, you need to use the power adapter distributed by our company to supply power; if it is a battery-powered version, just press the "power" button on the sensor.
(3) After the two parts are completed, the sensor and the Cross Bridge Cloud Box will establish a connection through the wireless module, wait a few minutes, use the sensor's unique ID, and view the data on our server.
Note: The establishment time of the connection between the sensor and the Cross Bridge cloud box is related to the signal, distance, and the default reporting time of the sensor.
(1) The equipment is used outdoors and needs to be placed in a relatively open and unobstructed position.
(2) Placed at a height of 4-5 meters to enhance signal strength and coverage
(3) Waterproof treatment should be done for outdoor use.
(4) For the specific operation of the Cross Bridge Cloud Box, please refer to the instructions for use.
(1) Use outdoors, and cannot be placed in a low-lying, confined environment.
(2) The equipment is placed in a higher position to enhance signal reception.
(3) Moisture-proof and high-temperature treatment should be done for outdoor use.
(4) All steel needles must be inserted into the soil during measurement.
(5) Do not bend the steel needle violently, pull the lead wire of the sensor forcefully, and do not hit the sensor or hit the sensor violently.
(6) When measuring the frozen soil layer, the moisture value will be low and inaccurate, and the user needs to compensate.
(7) The factory default product is suitable for measuring ordinary yellow soil, black soil, and red soil. It is not suitable for absolute moisture measurement on saline-alkali soils, sandy soils, or other powdery objects with high salinity. It can still characterize the relative moisture difference. For this type of moisture measurement, you should contact the manufacturer to do a separate calibration.
(8) The factory default provides 1.25m long wire, customers can extend the wire as needed or wire in order.
){kind=link}